1L Engine Flush

£ 15.00

HIGH PERFORMANCE ENGINE FLUSH // Pro-GreenMX Engine Flush has been specially developed for flushing inboard and outboard engines. It contains a water-based, non-toxic, non-hazardous and fully biodegradable solution that contains properties to dissolve, release and remove salt crystals from any surface.

1L5L

Why use it?

Pro-GreenMX Engine Flush is 100% salt-free, with no corrosive components in the product.
Fully biodegradable with recyclable packaging.
Engine Flush dissolves and releases salt crystals from any surface.
Contains a built-in inhibitor that will leave behind a microfilm of protection inside the engine, preventing salt water corrosion to internal parts.
Regular use will prevent salt build-up in the cooling system and other areas.
It is completely safe for use on all sensitive metals including aluminium.

Instructions for use

Add 50ml of Engine Flush to mixing unit.
Connect hose to auto-mix unit and connect the other end onto the engine flush port.
Turn water on and mix unit to rinse.
Allow engine to run for 5 minutes to allow thermostat to open, allowing full flow of fresh water through the engine.
Before turning engine off, turn the auto-mix settings to Engine-Flush.
You will notice the exhaust will start to foam.
Allow a further 30 seconds and then turn the engine off.

For best results, use with our other products;

Step 1 - Engine Flush

Step 2 - Aqua Wash

Step 3 - Aqua-Shine

Health & Safety